基于混合聚类的岩体结构面优势分组方法     

许扬  张文  符锐  聂振邦  兰志广  陈怀玉  单博 《世界地质》2020,39(1):113-120

提出一种基于凝聚层次法和模糊C均值法的混合聚类法,用于对岩体结构面的优势组划分。该方法将结构面投放到在单位球面上,并使用欧式距离作为极点的相似性度量准则。先剔除结构面数据中的孤值产状,然后用凝聚层次法得到初步聚类结果,并将其作为FCM法的初始聚类中心,最后用FCM法划分优势组。通对人工生成产状样本的分组,验证了该法的正确性。将该方法应用于大藤峡坝址区实测的结构面数据的划分。在实测数据中寻找到两个孤值产状,成功将大藤峡D1y^1-3地层岩体结构面划分为两组,得到了符合实际的分组结果。  相似文献   

高压旋喷桩单桩承载力分析     

王勃  行小盈 《岩土工程技术》2020,(1):48-52

高压喷射注浆于1968年首创于日本。我国于20世纪70年代初相继引进并开始研究高压喷射注浆技术。目前,高压旋喷工艺应用最为广泛,工艺技术最为成熟。对旋喷桩成桩质量及单桩承载力进行研究分析,为旋喷桩在地基与基础工程、水利水电工程、止水、加固工程中的应用提供设计参考依据。该试验在陕西省延安市某建成小区内选三个试验点,按不同旋喷桩施工工艺成桩,通过对桩身完整性检测、单桩承载力试验,分析旋喷桩成桩质量及单桩承载力。  相似文献   

内蒙古贺斯格乌拉牧场白音高老组火山岩U-Pb年龄及地球化学特征     

胡振华 《地质与勘探》2020,56(2):359-371

白音高老组火山岩在大兴安岭地区广泛分布,本文对大兴安岭中南部贺斯格乌拉牧场白音高老组酸性火山岩进行了锆石U-Pb年代学、岩石地球化学和Sr-Nd同位素分析,探讨其岩石成因及构造背景。位于大兴安岭中南段东乌旗地区的白音高老组火山岩,主要岩性为流纹岩、流纹质凝灰岩等,LA-ICP-MS锆石U-Pb年龄分别为129. 8±0. 8 Ma、128. 2±2. 8 Ma,属早白垩世早期;从岩石地球化学特征上看,其主量元素SiO_2含量68. 76%～76. 18%、Al_2O_3含量11. 84%～13. 38%,属高钾钙碱性岩石;稀土总量较高,(La/Yb)N 6,(La/Sm)_N 3,显示为轻稀土富集型,δEu显示负铕异常(0. 4～0. 6),微量元素以富集大离子亲石元素K、Rb、Ba,贫高场强元素Nb、P、Ti为特征; Sr-Nd同位素组成上具有低I_(Sr)、高ε_(Nd)(t)和低t_(DM)的特征(I_(Sr)=0. 7039～0. 7045,ε_(Nd)(t)=2. 65～4. 39)。火山岩浆来源于下地壳基性物质的部分熔融,综合研究并结合前人资料认为,白音高老组流纹岩形成于滨太平洋板块俯冲后伸展及蒙古-鄂霍次克洋闭合后的综合效应下。  相似文献   

Radar isochronic layer dating for a deep ice core at Kunlun Station,Antarctica     

Tang  Xueyuan  Sun  Bo  Wang  Tiantian 《中国科学:地球科学(英文版)》2020,63(2):303-308

The ages and accumulation rates of ice are important boundary conditions for paleoclimatic ice models. Radardetected isochronic layers can be used to date the ice column beneath the ice surface and infer past accumulation rates. A Deep Ice-Core Drilling Project has been carried out at Kunlun station in the Dome A region, East Antarctica. Radio echo sounding data are collected during the 2004/2005 Chinese National Research Expedition and the 2007/2008 Dome Connection East Antarctica project of the Alfred Wegener Institute(Germany). Radar isochronic layers from the dataset were linked to compare a new deep ice core site from Kunlun station and the Vostok ice core site. Ten visible layers, accounting for ~50% ice thickness at the Kunlun station ice core site, were dated based on the Vostok ice core chronology. At 1,640 m depth below surface, an age of ~160,400 yr was determined, corresponding to a bright layer at Kunlun station. These layers provided geometric information on the past surface of the ice sheet around the ice core site through the Wisconsin glacial stage, Eemian interglacial and Marine Isotope Stage6. Based on a simple ice flow model and the age-depth relationship, we concluded that the region around the Kunlun ice core site had lower past accumulation rates, consistent with the present pattern. The age-depth relationship would thus be expected to correlate and constrain the chronology of the deep ice core at Kunlun station in the future.  相似文献   

浑河断裂地球物理场特征及地震活动性     

张鐘月  万波  彭虎  田德欣 《世界地质》2020,39(1):176-184

浑河断裂是辽宁省内一条重要的北东向地震构造带,断裂两侧的地球物理重磁场存在差异。通过浑河断裂的区域重力场与磁场研究,认为浑河断裂既控制了深、浅部岩石地层的发育,同时浑河断裂的重力场、磁场分布随着深、浅部地层岩性发育的差异而有所变化。浑河断裂的重力场和磁场梯度带主要位于抚顺以西至沈阳一带,浑河断裂历史以来有记录的最大破坏性地震位于重力梯度变化较大的沈阳段。综合浑河断裂地球物理场特征及区域地质资料,浑河断裂虽然活动性一般,但抚顺地区的采煤活动对断裂的活动性有一定影响。近些年抚顺地区频发的沉降、滑坡和地裂缝等地质灾害应当引起对浑河断裂活动性研究的重视。  相似文献   

电感耦合等离子体质谱法测定花岗伟晶岩中锂、铍、铷、铯、铌和钽     

胡兰基  朱琳  赵玉卿  马龙  王洪桂  方宏树  何媛媛 《化工矿产地质》2020,42(4)

  相似文献   

圆筒型FPSO优化设计与水动力性能分析     

赵治民  李焱  唐友刚  何鑫  童波 《海洋工程》2020,38(1):11-19

针对圆筒型海上储油装置FPSO垂荡运动性能较差、无法安装干式井口的问题,设计了带延伸筒体与矩形阻尼结构的圆筒型FPSO,根据延伸筒体与矩形阻尼结构是否通海分为两种型式。建立水动力计算模型,比较分析不同延伸筒体和阻尼结构型式对FPSO水动力性能的影响。针对南海作业海域,设计了悬链式系泊系统,基于JONSWAP波浪谱对FPSO的运动进行时域预报,并对系泊系统进行校核。分析结果表明:通海型FPSO垂荡固有周期显著提升,可以错开南海百年一遇谱峰周期,通海型FPSO满足钻井、安装干式井口的运动响应要求,系泊系统系缆张力满足规范要求。  相似文献   

五圆柱体结构群绕流特性及互扰效应研究     

涂佳黄  张志豪  曹波  肖毅凡  梁经群 《海洋工程》2020,38(1):101-110

基于Fluent流体计算平台,运用大涡模拟方法对亚临界雷诺数Re=3900下“X”形排列五圆柱体结构群三维绕流特性进行研究,主要分析来流攻角α与间距比L/D两个关键参数对五圆柱体结构群的尾流区三维涡结构演化与流体力系数的影响,并揭示其内在流动互扰机理。研究表明:来流攻角和间距比的变化对五圆柱体结构群流动控制及互扰效应的影响显著。在小间距比工况下,观察到柱体群间隙区域内流体高速流动的现象,导致五圆柱体之间的互扰作用十分强烈。间隙流对中间圆柱体和下游圆柱体有较强的冲击作用,对其表面的流体力分布特性有显著的影响。另外,大间距比工况下,当α=0°与L/D≥5.0工况时,柱体群尾流效应强于其间隙流效应。当α=22.5°与L/D=7.0时,位于下游与中间处的圆柱体流体绕流特性存在较大差异。而当α=45°与L/D≥6.0时,位于上游与中间处的圆柱体尾流区均会产生正负交替的漩涡结构。  相似文献   

Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models     

Hui Hu 《Marine Georesources & Geotechnology》2020,38(3):332-348

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献